Audio Player Microphone Accessories features and price
Want to buy a best Microphone Accessories? Then check following listed Microphone Accessories products. Read features, product description. Buy from these best online deals.
Table of Contents
Microphone Accessories
Following are the list of Microphone Accessories
Krown XLR Female To RCA Male 1.5Meter Cable(Black)
Product Details:
"Krown XLR Female to RCA Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Female Connector and RCA Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: XLR FemaleConnector B: RCA MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - XLR Female Connector Side B: - RCA MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Female To RCA Male 1.5Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹600/- |
| Product Type | Musical Instruments, Microphone Accessories |
Aeoss Double Layer Studio Mic Wind Pop Filter(Black)
| Product Title | Aeoss Double Layer Studio Mic Wind Pop Filter(Black) |
|---|---|
| Product Brand | Aeoss |
| Product Price | ₹1499/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX Audio Cable Stage Junction 24 Port Box For Microphone Cable With XLR RCA 3.5mm 6.3mm Mono Stereo And Speakon Jack Extensions 24-Way Sound Junction Box(Black)
| Product Title | MX Audio Cable Stage Junction 24 Port Box For Microphone Cable With XLR RCA 3.5mm 6.3mm Mono Stereo And Speakon Jack Extensions 24-Way Sound Junction Box(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹1875/- |
| Product Type | Musical Instruments, Microphone Accessories |
Melodeum Microphone 3.5mm Cable(Black)
Product Details:
Mini wireless microphone is a domestic mass production of wireless digital microphone, mainly used in the PA and amplifier / loudspeaker / instrument / computer / communications equipment and other professional occasions, using state-of-the-art wireless digital audio transmission technology, the total harmonicwave distortion restore any details of the signal to the maximum extent. Built-in high-performance microprocessor, easy operation and intelligent. 100% brand new & high quality. Plug Type: 3.5mm L Jack Cable Length: 105cm Sensitivity: -52dB ± 5dB Small, compact design allows you to easily clip it to your shirt, tie or pocket This mini microphone clips on to your shirt, tie, or pocket, and allows you hands-free comfort. Chat in comfort while using Skype, VOIP, gaming, video conferencing, or while recording your notes.
| Product Title | Melodeum Microphone 3.5mm Cable(Black) |
|---|---|
| Product Brand | Melodeum |
| Product Price | ₹799/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Female To RCA Male 5 Meter Cable(Black)
Product Details:
"Krown XLR Female to RCA Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Female Connector and RCA Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: XLR FemaleConnector B: RCA MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - XLR Female Connector Side B: - RCA MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Female To RCA Male 5 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹800/- |
| Product Type | Musical Instruments, Microphone Accessories |
Mobaccx 3.5mm Clip Microphone Collar Mike For Voice Recording Lapel Mic Mobile, PC, Laptop, Android Smartphones, DSLR Camera Clip Collar(Black)
| Product Title | Mobaccx 3.5mm Clip Microphone Collar Mike For Voice Recording Lapel Mic Mobile, PC, Laptop, Android Smartphones, DSLR Camera Clip Collar(Black) |
|---|---|
| Product Brand | Mobaccx |
| Product Price | ₹999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Black Dragon CTP 10 Connector(Black)
| Product Title | Black Dragon CTP 10 Connector(Black) |
|---|---|
| Product Brand | Black Dragon |
| Product Price | ₹1599/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Mono Male To 3.5MM Mono Male 10 Meter Cable(Black)
Product Details:
"Krown 6.3MM Mono Male to 3.5MM Mono Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Mono Male Connector and 3.5MM Mono Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Mono MaleConnector B: 33.5MM Mono MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Mono MaleConnector Side B: - 3.5MM Mono Male Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Mono Male To 3.5MM Mono Male 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1140/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX Audio Cable Tester Tests XLR 6.35mm TRS 1/4" TS Speakon Jack 2 & 4 Pole Din RCA Plug Banana Cables Cable Testers(Black)
| Product Title | MX Audio Cable Tester Tests XLR 6.35mm TRS 1/4" TS Speakon Jack 2 & 4 Pole Din RCA Plug Banana Cables Cable Testers(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹3565/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To 6.3MM Stereo Female 3 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to 6.3MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and 6.3MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6 6.3MM Stereo FemaleConnector B: 6.3MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - 6.3MM Stereo FemaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To 6.3MM Stereo Female 3 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹630/- |
| Product Type | Musical Instruments, Microphone Accessories |
SHOPTICO Mirophone_s28 Microphone(Black)
| Product Title | SHOPTICO Mirophone_s28 Microphone(Black) |
|---|---|
| Product Brand | SHOPTICO |
| Product Price | ₹1999/- |
| Product Type | Musical Instruments, Microphone Accessories |
KLUZIE Professional Conference Room Microphone Table Desktop Stand Universal Mic Holder Tripod Mount Holder Stand(Black, Steel)
Product Details:
This microphone stand is designed for use on a table or desk, excellent for commentary, panel discussions, announcements and other similar situations. This stand can also be used for micing up speaker cabinets and instruments. Perfect for schools, theatres, clubs, bars, conference facilities, entertainment venues,studios (professional/project), home tuition and practice. Description: Mic clip included Height adjustable Lightweight and strong Folds to a nice compact size ABS plastic body Steel chrome legs Rubber non-slip feet Quick and easy to assemble/disassemble The mic clip can be unscrewed clip diameter: about 3.5cm Package Includes : 1 x Microphone Stand
Easy fold-up
compact size
Lightweight and strong
Easy fold-up
compact size
Lightweight and strong
| Product Title | KLUZIE Professional Conference Room Microphone Table Desktop Stand Universal Mic Holder Tripod Mount Holder Stand(Black, Steel) |
|---|---|
| Product Brand | KLUZIE |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX Special Rubber Microphone : 3433d Holder(Black)
Product Details:
MX Mic Holders are Microphone Mounting System Package has everything you need to get set your mic and ready to rock. MX Mic Holders helps eliminate clutter around your stands your drum kits, lessening your need for floor space. These compact, durable microphone mounts can be left permanently attached to your hardware stand. MX Mic Holders is Special Rubber Mic Holder Small.
| Product Title | MX Special Rubber Microphone : 3433d Holder(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹520/- |
| Product Type | Musical Instruments, Microphone Accessories |
Monoprice 24k Speaker Banana Plugs, Closed Screw Type (s) Adapter(Gold)
Product Details:
Banana plugs make speaker installation a breeze. They are designed for use with amplifiers or speakers that use traditional binding posts. Not only is it easier to make the connection on the back of your amp, it is safer, with no chance of stray wire strands creating a short across contacts. These high quality plugs are the closed screw type and can accept bare wire or spades. They are sized to fit speaker wire from 12 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification. The plug body is made of brass, which is then plated with gold to help prevent corrosion and ensure smooth connections. This multi-pack includes five pairs of plugs, perfect for connecting the satellite and center channel speakers in a 5.1 channel setup.
| Product Title | Monoprice 24k Speaker Banana Plugs, Closed Screw Type (s) Adapter(Gold) |
|---|---|
| Product Brand | Monoprice |
| Product Price | ₹2100/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Mono Male To 6.3MM Stereo Female 1.5Meter Cable(Black)
Product Details:
"Krown 6.3MM Mono Male to 6.3MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Mono Male Connector and 6.3MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Mono MaleConnector B: 6.3MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Mono MaleConnector Side B: - 6.3MM Stereo Female Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Mono Male To 6.3MM Stereo Female 1.5Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹520/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Female To 6.3MM Mono Male Microphone 5 Meter Cable(Black)
Product Details:
"Krown XLR Female to 6.3MM Mono Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Female Connector and 6.3MM Mono Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: XLR FemaleConnector B: 6.3MM Mono MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - XLR Female Connector Side B: - 6.3MM Mono Male Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Female To 6.3MM Mono Male Microphone 5 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹800/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To RCA Female 8 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to RCA Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and RCA Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Stereo FemaleConnector B: RCA FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - RCA Female Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To RCA Female 8 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹840/- |
| Product Type | Musical Instruments, Microphone Accessories |
ShopAis 3.5mm Clip Microphone Collar Mike For Voice Recording Recording(Black)
| Product Title | ShopAis 3.5mm Clip Microphone Collar Mike For Voice Recording Recording(Black) |
|---|---|
| Product Brand | ShopAis |
| Product Price | ₹499/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To RCA Male 3 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to RCA Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and RCA Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6 6.3MM Stereo FemaleConnector B: RCA MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - RCA MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To RCA Male 3 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹620/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Mono Male To RCA Female 15 Meter Cable(Black)
Product Details:
"Krown 6.3MM Mono Male to RCA Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Mono Male Connector and RCA Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Mono MaleConnector B: RCA FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Mono MaleConnector Side B: - RCA Female Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Mono Male To RCA Female 15 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1360/- |
| Product Type | Musical Instruments, Microphone Accessories |
5 Core STUDIO-MIC-36 Studio Microphone(Grey)
Product Details:
5 CORE presents premium-quality, durable, reliable Recording Microphone with clear and crisp sound recording feature that enables high-end user’s experience. Body Material: Heavy-duty powder-coated Metal Features: Superior-quality cartridge purposely designed for recording feature USP: Acoustically designed for recording purpose.
| Product Title | 5 Core STUDIO-MIC-36 Studio Microphone(Grey) |
|---|---|
| Product Brand | 5 Core |
| Product Price | ₹9999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Anytech 10 Pack Mini Lavalier Microphone Clip Safe Hold Shock Secure Lapel Mic Clamp Mic Clip(Black)
Product Details:
microphone, perfect for video use, designed for Smartphones, DSLR, Camcorders, Audio recorders, PC etc. The lavalier microphone features an Omni pickup pattern, for full, 360-degree coverage. An integrated 1-Meter cable with 3.5mm jack can connect directly to Smartphones, most of cameras.For Smartphone: Switch off the Compact, attractive appearance, high sensitivity High quality design fit voice chat, video conferencing, voice recording, online karaoke Clip-on design, easy to clip it to your shirt, collar or placed in small pockets This product is compatible in accordance with standard headset jacks 7RRS, CTIA equipment
| Product Title | Anytech 10 Pack Mini Lavalier Microphone Clip Safe Hold Shock Secure Lapel Mic Clamp Mic Clip(Black) |
|---|---|
| Product Brand | Anytech |
| Product Price | ₹559/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX 5 Pcs Of Universal Satellite Speaker Wall Mount Bracket Adjustable Tilt Swivel Stands(Black)
| Product Title | MX 5 Pcs Of Universal Satellite Speaker Wall Mount Bracket Adjustable Tilt Swivel Stands(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹1875/- |
| Product Type | Musical Instruments, Microphone Accessories |
Rode PG-1 Cold Show Pistol Grip, Black(Black)
| Product Title | Rode PG-1 Cold Show Pistol Grip, Black(Black) |
|---|---|
| Product Brand | Rode |
| Product Price | ₹5999/- |
| Product Type | Musical Instruments, Microphone Accessories |
BIRATTY Sound Studio Recording Condenser Wired Microphone Pop Filter For KTV Karaoke Microphone(Blue)
Product Details:
This microphone with a good cardioids polar pickup pattern, high output, low self-noise, suitable especially for studios, recording studios, broadcasting stations, adage performances and computer. Ideal as main and support microphone for studio and live applications. Insert to hold and protect microphone. Standard screw adapter, you can mount it on all the standard microphone stands. Ideal for radio broadcasting studio, voice-over sound studio, recording and so on. Package Included: 1 x Microphone ,1 x Shock Mount ,1 x Connect Wire ,1 x Pop filter ,1 x User Manual
48V phantom power adapter is not included.
48V phantom power adapter is not included.
| Product Title | BIRATTY Sound Studio Recording Condenser Wired Microphone Pop Filter For KTV Karaoke Microphone(Blue) |
|---|---|
| Product Brand | BIRATTY |
| Product Price | ₹2999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown BNC Male To BNC Male For CCTV/DVR 20 Meter Cable(Black)
Product Details:
"Krown BNC Male to BNC Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on CCTV, medical instruments, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated BNC Male Connector and BNC Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - BNC MaleConnector B: - BNC MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - BNC Male Connector Side B: - BNC MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown BNC Male To BNC Male For CCTV/DVR 20 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1740/- |
| Product Type | Musical Instruments, Microphone Accessories |
BONTRONICS HIGH DEMAND Beginner Singer Bluetooth Handheld Karaoke Wireless Microphone Portable Hifi Speaker 2-in-1 Sing & Recording With Voice Change ,for MOBILE/LAPTOP/TABLET/PC/ALL MOBILE SUPPORTED WIRELESS (GOLD) WIRELESS(Gold)
Product Details:
Brand new and high quality Portable and durable, lightweight, easy to carry Bluetooth technology for lower energy consumption but more stable connection and faster transmits speed, effective wireless operating distance is up to 10m. Metal shell protective and super bass loss-less sound create a high-quality listening experience. Noise cancellation function wireless capacitive microphone, you can enjoy singing wonderful music by yourself. Bluetooth wireless design for connecting to any Bluetooth enabled smart devices. Distortion is less than 0.5 percent, reduce the loss of sound quality effectively. Fashion outdoor bag design, it can be hung on the bike or taken by hands, let you enjoy music all the way. It also can recording with mobile phone, connect the recording wire and open the Karaoke software in the mobile phone, then you can record the song and save it. Suitable for picnic trips, party, family entertainment, singing karaoke, etc.. Compatible with Most mobile phones and tablets...
PC
LAPTOP
TABLET
MOBILE
PC
LAPTOP
TABLET
MOBILE
| Product Title | BONTRONICS HIGH DEMAND Beginner Singer Bluetooth Handheld Karaoke Wireless Microphone Portable Hifi Speaker 2-in-1 Sing & Recording With Voice Change ,for MOBILE/LAPTOP/TABLET/PC/ALL MOBILE SUPPORTED WIRELESS (GOLD) WIRELESS(Gold) |
|---|---|
| Product Brand | BONTRONICS |
| Product Price | ₹1499/- |
| Product Type | Musical Instruments, Microphone Accessories |
KLUZIE Universal Studio Mic Stand Sound Broadcasting Recording Mic Microphone Stand Mounting Clip Holder Stand(Black, Steel)
Product Details:
This microphone stand is designed for use on a table or desk, excellent for commentary, panel discussions, announcements and other similar situations. This stand can also be used for micing up speaker cabinets and instruments. Perfect for schools, theatres, clubs, bars, conference facilities, entertainment venues,studios (professional/project), home tuition and practice. Description: Mic clip included Height adjustable Lightweight and strong Folds to a nice compact size ABS plastic body Steel chrome legs Rubber non-slip feet Quick and easy to assemble/disassemble The mic clip can be unscrewed clip diameter: about 3.5cm Package Includes : 1 x Microphone Stand
Easy fold-up
compact size
Lightweight and strong
Easy fold-up
compact size
Lightweight and strong
| Product Title | KLUZIE Universal Studio Mic Stand Sound Broadcasting Recording Mic Microphone Stand Mounting Clip Holder Stand(Black, Steel) |
|---|---|
| Product Brand | KLUZIE |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
Samson MD-5 Desktop Microphone Stand(Black)
Product Details:
Samson's MD5 Desktop Microphone Stand is the ideal tool for any home studio. The MD5 is slim enough to fit on your desk, but also contains a weighted metal base to ensure guaranteed stability and compatibility with any microphone you prefer no matter its size or weight. It's perfect for podcasts, voiceovers, recording music or any other application where high-quality audio is essential. Easy setup and sturdy components make the Samson's MD5 the essential accessory for your desktop studio.
| Product Title | Samson MD-5 Desktop Microphone Stand(Black) |
|---|---|
| Product Brand | Samson |
| Product Price | ₹1671/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To RCA Male 15 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to RCA Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and RCA Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6 6.3MM Stereo FemaleConnector B: RCA MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - RCA MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To RCA Male 15 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1360/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3 Mm (P-38) Stereo Male Plug To 3.5mm (Earphones) Female Stereo Connector - Metal - Pack Of 2 Converter(Black)
Product Details:
Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector is used for many professional audio applications. Krown P-38/TRS connector does not suffer from insertion loss. Krown P-38/TRS Connectors are simple to use, Reliable and provide cable protection. • Krown P-38 stereo plug to Krown 3.5mm EP stereo socket adaptor.• Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector can be use with microphones, electric guitars, headphones, loudspeakers, and many other items of audio equipment.• Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector hasPrecision machined one-piece contacts - avoid hook up of tip contact.• Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector Meets all prevailing standards.• Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector has High quality Krown 1/4" male stereo audio connector.• Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector has Fully machined connector.• Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector is durable.• Krown P-38/TRS stereo plug to Krown EP/TRS 3.5mm stereo socket adaptor connector is Easy to install.
High Quality
Low Distortion
Tight Grip
Durable
High Quality
Low Distortion
Tight Grip
Durable
| Product Title | Krown 6.3 Mm (P-38) Stereo Male Plug To 3.5mm (Earphones) Female Stereo Connector - Metal - Pack Of 2 Converter(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹299/- |
| Product Type | Musical Instruments, Microphone Accessories |
Anaya WS-858 Wireless Handheld Bluetooth Mic With Speaker (Bluetooth Speaker) Audio Recording And Karaoke Feature Microphone Handheld 858(Gold)
Product Details:
Premium Quality Wireless Bluetooth WS-858 Microphone MIC Recording Condenser Handheld Microphone Stand with Speaker for Cellphone Karaoke Best for Holiday Festival Journey Wireless karaoke o Supply power: hold button to start the product. o Wireless connection: enable the Wireless of mobile phone, click to connect, successful connection if prompt tone is produced. o Adjust sound: adjust the sound volume of mike and the reverberation to suitable level. o Start karaoke. Recording with mobile phone o Connect the recording wire: insert the MICRO plug of the recording wire into the MICRO interface of karaoke treasure, and the 3.5mm interface info the earphone jack of the mobile phone. o Open the karaoke software in the mobile phone, such as: USING, kugou music or other recording APPs, select your favorable song, record the song according to the above mentioned singing method. o Test and save the song: according to the instructions of karaoke software. Specification : 1. Output Power: 5W. 2. Frequency Range: 100Hz~10 KHz. 3.Max Sound Pressure Level: >115db 1 KHz TDH <1%. 4. Reverberation Mode: Sound effect reverberation. 5. Power Supply: Built-in 18650 Li-battery. 6. Battery Capacity: 1800mAh. 7. Charging Power: DC 5V. 8. Color: Multi Color's. 9. Size: 20 x 7 x 7cm. Package included : 1 x Microphone. 1 x Charging Cable. 1 x Audio Cable.
| Product Title | Anaya WS-858 Wireless Handheld Bluetooth Mic With Speaker (Bluetooth Speaker) Audio Recording And Karaoke Feature Microphone Handheld 858(Gold) |
|---|---|
| Product Brand | Anaya |
| Product Price | ₹2999/- |
| Product Type | Musical Instruments, Microphone Accessories |
ShoppoStreet Handheld Wireless Microphone With Bluetooth Speaker Bluetooth Speaker(Yellow)
Product Details:
Multipurpose: Bluetooth speaker, singing, Car Stereo, instrument recording, interviews, podcasting, etc. Ideal for all vocal applications from singing to speech and usable as bluetooth speaker. Features: With the speaker you can instantly create your own fun anywhere you like. For the budding singer there's no better way to show off to your friends and bring some X-factor magic to your life because if you've got talent then why not flaunt it. Get into the party mood and sing till you drop with the Q7 Bluetooth Microphone and Speaker. This is the latest in portable music entertainment as it will let you play music direct from your Smartphone or other Bluetooth enabled Device. Product Type: Full Metal K Song Microphone. Pickup: Capacitive Bluetooth 2.1.
| Product Title | ShoppoStreet Handheld Wireless Microphone With Bluetooth Speaker Bluetooth Speaker(Yellow) |
|---|---|
| Product Brand | ShoppoStreet |
| Product Price | ₹1499/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Mono Male To 6.3MM Mono Male 15 Meter Cable(Black)
Product Details:
"Krown 6.3MM Mono Male to 6.3MM Mono Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Mono Male Connector and 6.3MM Mono Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Mono MaleConnector B: 6.3MM Mono MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Mono MaleConnector Side B: - 6.3MM Mono MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Mono Male To 6.3MM Mono Male 15 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1400/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Mono Male To 3.5MM Stereo Female 10 Meter Cable(Black)
Product Details:
"Krown 6.3MM Mono Male to 3.5MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Mono Male Connector and 3.5MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Mono MaleConnector B: 3.5MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Mono MaleConnector Side B: - 3.5MM Stereo Female Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Mono Male To 3.5MM Stereo Female 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1140/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To RCA Female 3 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to RCA Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and RCA Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Stereo FemaleConnector B: RCA FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - RCA Female Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To RCA Female 3 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹620/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Male To 6.3MM Stereo Male 3 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Male to 6.3MM Stereo Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on CCTV, medical instruments, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Male Connector and 6.3MM Stereo Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - 6.3MM Stereo MaleConnector B: - 6.3MM Stereo MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo MaleConnector Side B: - 6.3MM Stereo MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Male To 6.3MM Stereo Male 3 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹630/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 3.5mm (Earphone) Stereo Female To 3.5 Mm (Earphone) Stereo Female Jointer Connector - Metal - Pack Of 2 Converter(Black)
Product Details:
Krown EP STEREO SOCKET 3.5 mm TO Krown EP STEREO SOCKET 3.5 mm ADAPTOR (METAL)FEATURESKrown 3.5mm EP stereo socket to Krown 3.5mm EP stereo socket adaptor.Krown 3.5mm EP stereo socket to Krown 3.5mm EP stereo socket adaptor has full metal body.Krown 3.5mm EP stereo socket to Krown 3.5mm EP stereo socket adaptor is Easy to install.Krown 3.5mm EP stereo socket to Krown 3.5mm EP stereo socket adaptor is Durable.Krown 3.5mm EP stereo socket to Krown 3.5mm EP stereo socket adaptor is robust.Krown 3.5mm EP stereo socket to Krown 3.5mm EP stereo socket adaptor is reliable.Krown 3.5mm EP stereo socket to Krown 3.5mm EP stereo socket adaptor is Compact in size.
High Quality
Low Distortion
Tight Grip
Durable
High Quality
Low Distortion
Tight Grip
Durable
| Product Title | Krown 3.5mm (Earphone) Stereo Female To 3.5 Mm (Earphone) Stereo Female Jointer Connector - Metal - Pack Of 2 Converter(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹299/- |
| Product Type | Musical Instruments, Microphone Accessories |
Smart BLWH01 BLUTOOTH(White)
Product Details:
Exquisite design and lightweight volume will give you a better experience. Multi button control will make it easier for you to use the product. Metal dust net. The metal dust screen prevents dust from entering the headphone hole and interferes with your experience. Sound quality is the guarantee of our products. Surround surround and voice switching will provide high quality call guarantee
| Product Title | Smart BLWH01 BLUTOOTH(White) |
|---|---|
| Product Brand | Smart |
| Product Price | ₹3999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Male To 6.3MM Stereo Female Cable 3 Meter Cable(Black)
Product Details:
"Krown XLR Male to 6.3MM Stereo Female cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Male Connector and 6.3MM Stereo FemaleConnector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Length: 3 MeterConnector A: 3 Pin XLR MaleConnector B: 6.3MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A :- 3 Pin XLR MaleConnector Side B :- 6.3MM Stereo FemaleLength :- 3 MeterSignal Type :- Mono / UnbalancedUse :- AudioColor :- BlackShielding :- Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scroller miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Male To 6.3MM Stereo Female Cable 3 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
Prodx Windscreen Microphone Foam Pack Of-2pcs Shield Sponge Foam(Pink)
| Product Title | Prodx Windscreen Microphone Foam Pack Of-2pcs Shield Sponge Foam(Pink) |
|---|---|
| Product Brand | Prodx |
| Product Price | ₹665/- |
| Product Type | Musical Instruments, Microphone Accessories |
Samson SMS-1 Shock Mounted Flange Mount(Black)
Product Details:
The Samson SMS1 is a combination flange and shockmount for Samson Contractor series gooseneck microphones (CM15 and CM20). The SMS1 mounts flush into any flat surface while providing a secure mounting fixture, which minimizes surface and shock noise.
| Product Title | Samson SMS-1 Shock Mounted Flange Mount(Black) |
|---|---|
| Product Brand | Samson |
| Product Price | ₹1000/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Male To RCA Male Cable 15 Meter Cable(Multicolor)
Product Details:
"Krown XLR Male to RCA Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Male Connector and RCA Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Length: 15 MeterConnector A: 3 Pin XLR MaleConnector B: RCA MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 3 Pin XLR MaleConnector Side B: - RCA Male Length: - 15 MeterSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Male To RCA Male Cable 15 Meter Cable(Multicolor) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1440/- |
| Product Type | Musical Instruments, Microphone Accessories |
Powerpak Universal Microphone Metal Shock Mount Holder Clip For Studio Condenser Microphone Shock Mount For Studio Condenser Microphone(Silver)
Product Details:
Powerpak Metal Finish Shock mount is fit for mic of 43 to 46mm diameter. This is a very nice shock mount for most large diaphragm condenser microphone. The shock mount can effectively reduce handling noise. Isolate most studio condenser mics from physical vibration, floor and stand noise. Feature an angle adjustment with locking knob. Felt/foam insert to hold and protect microphone. Contains shock mount only and doesn't not include microphone, cable or mic boom. The die-cast steel adapter with 5/8th inch 27 threads features an angle adjustment with locking knob and will attach to any mic boom. Material: Plastic Bearable Load: 3kg. Package Includes: 1x Shock Mount.
| Product Title | Powerpak Universal Microphone Metal Shock Mount Holder Clip For Studio Condenser Microphone Shock Mount For Studio Condenser Microphone(Silver) |
|---|---|
| Product Brand | Powerpak |
| Product Price | ₹2000/- |
| Product Type | Musical Instruments, Microphone Accessories |
Padraig Q7 Handheld Wireless Bluetooth Karaoke Singing Mic Speaker Player Microphone Microphone(Black)
| Product Title | Padraig Q7 Handheld Wireless Bluetooth Karaoke Singing Mic Speaker Player Microphone Microphone(Black) |
|---|---|
| Product Brand | Padraig |
| Product Price | ₹3999/- |
| Product Type | Musical Instruments, Microphone Accessories |
SHAFIRE 10 Pcs Handheld Stage Microphone Windscreen Foam Mic Cover Karaoke Microphone Sponge Cover(Black)
Product Details:
100% brand new and high quality It is suitable for ball or U shape microphone Protect your microphone against wind interference Length: 80 mm Material: sponge Quantity: 10Pcs Color: black Package Includes: 10 Pcs Handheld Stage Microphone Windscreen Product colour may slightly vary due to photographic lighting sources or your monitor settings also allow for 1 to 2 cms difference in the size due to different measuring methods.
| Product Title | SHAFIRE 10 Pcs Handheld Stage Microphone Windscreen Foam Mic Cover Karaoke Microphone Sponge Cover(Black) |
|---|---|
| Product Brand | SHAFIRE |
| Product Price | ₹999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Female To 3.5MM Stereo Female 1.5Meter Cable(Black)
Product Details:
"Krown XLR Female to 3.5MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Female Connector and 3.5MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: XLR FemaleConnector B: 3.5MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - XLR Female Connector Side B: - 3.5MM Stereo Female Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Female To 3.5MM Stereo Female 1.5Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹600/- |
| Product Type | Musical Instruments, Microphone Accessories |
Prodx Rca Male To 2rca Female Pack Of-2pes Connector(Black)
| Product Title | Prodx Rca Male To 2rca Female Pack Of-2pes Connector(Black) |
|---|---|
| Product Brand | Prodx |
| Product Price | ₹350/- |
| Product Type | Musical Instruments, Microphone Accessories |
Rode VC1 3.5mm Stereo MINI JACK EXTENSION CABLE(Black)
| Product Title | Rode VC1 3.5mm Stereo MINI JACK EXTENSION CABLE(Black) |
|---|---|
| Product Brand | Rode |
| Product Price | ₹1995/- |
| Product Type | Musical Instruments, Microphone Accessories |
5 Core MC-5 Black Universal Microphone Clip/Holder(Black)
Product Details:
5 Core convenient to carry microphone holder/clip. Completely flexible, firmly attach the Microphone anywhere. Suitable for all the microphone. Package includes: 1 Microphone Stand Holder, Material is Plastic & Color is Black.
Compact & Light Weight
Easy To Use
Standard Sized
Material : Plastic
Compact & Light Weight
Easy To Use
Standard Sized
Material : Plastic
| Product Title | 5 Core MC-5 Black Universal Microphone Clip/Holder(Black) |
|---|---|
| Product Brand | 5 Core |
| Product Price | ₹399/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Male To 6.3MM Stereo Male Cable 20 Meter Cable(Black)
Product Details:
"Krown XLR Male to 6.3MM Stereo Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Male Connector and 6.3MM Stereo Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 3 Pin XLR MaleConnector B: 6.3MM Stereo Male Unbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 3 Pin XLR MaleConnector Side B: - 6.3MM Stereo MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Male To 6.3MM Stereo Male Cable 20 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1760/- |
| Product Type | Musical Instruments, Microphone Accessories |
KLUZIE Mini Desktop Mic Tripod Clamp Stand Holder Stand(Black, Steel)
Product Details:
This microphone stand is designed for use on a table or desk, excellent for commentary, panel discussions, announcements and other similar situations. This stand can also be used for micing up speaker cabinets and instruments. Perfect for schools, theatres, clubs, bars, conference facilities, entertainment venues,studios (professional/project), home tuition and practice. Description: Mic clip included Height adjustable Lightweight and strong Folds to a nice compact size ABS plastic body Steel chrome legs Rubber non-slip feet Quick and easy to assemble/disassemble The mic clip can be unscrewed clip diameter: about 3.5cm Package Includes : 1 x Microphone Stand
Easy fold-up
compact size
Lightweight and strong
Easy fold-up
compact size
Lightweight and strong
| Product Title | KLUZIE Mini Desktop Mic Tripod Clamp Stand Holder Stand(Black, Steel) |
|---|---|
| Product Brand | KLUZIE |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
ALONZO Professional Studio Recording Condenser Microphone, Bm3000 With Shock Mount Great Microphone(Blue)
| Product Title | ALONZO Professional Studio Recording Condenser Microphone, Bm3000 With Shock Mount Great Microphone(Blue) |
|---|---|
| Product Brand | ALONZO |
| Product Price | ₹2730/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Male To 6.3MM Mono Cable 10 Meter Cable(Black)
Product Details:
"Krown XLR Male to 6.3 Mono Male cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Male Connector and 6.3 Mono Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Length: 10 MeterConnector A: 3 Pin XLR MaleConnector B: 6.3 Mono MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A :- 3 Pin XLR MaleConnector Side B :- 6.3 Mono MaleLength :- 10 MeterSignal Type :- Mono / UnbalancedUse :- AudioColor :- BlackShielding :- Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scroller miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Male To 6.3MM Mono Cable 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1200/- |
| Product Type | Musical Instruments, Microphone Accessories |
KLUZIE Universal Mic Tripod Mount Desktop Table Microphone Clip Holder Stand(Black, Steel)
Product Details:
This microphone stand is designed for use on a table or desk, excellent for commentary, panel discussions, announcements and other similar situations. This stand can also be used for micing up speaker cabinets and instruments. Perfect for schools, theatres, clubs, bars, conference facilities, entertainment venues,studios (professional/project), home tuition and practice. Description: Mic clip included Height adjustable Lightweight and strong Folds to a nice compact size ABS plastic body Steel chrome legs Rubber non-slip feet Quick and easy to assemble/disassemble The mic clip can be unscrewed clip diameter: about 3.5cm Package Includes : 1 x Microphone Stand
Easy fold-up
compact size
Lightweight and strong
Easy fold-up
compact size
Lightweight and strong
| Product Title | KLUZIE Universal Mic Tripod Mount Desktop Table Microphone Clip Holder Stand(Black, Steel) |
|---|---|
| Product Brand | KLUZIE |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Male To 3.5MM Stereo Female 3 Meter Cable(Black)
Product Details:
"Krown XLR Male to 3.5MM stereo Female Cables are typically used for analog signals, primarily audio. Krown XLR Male to 3.5MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Male Connector and 3.5MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 3 Pin XLR MaleConnector B: 3.5MM Stereo Female Unbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 3 Pin XLR MaleConnector Side B: - 3.5MM Stereo FemaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Male To 3.5MM Stereo Female 3 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹720/- |
| Product Type | Musical Instruments, Microphone Accessories |
KLUZIE Mini Desktop Mic Tripod Stand Conference Room, Studio Sound Holder Stand(Black, Steel)
Product Details:
This microphone stand is designed for use on a table or desk, excellent for commentary, panel discussions, announcements and other similar situations. This stand can also be used for micing up speaker cabinets and instruments. Perfect for schools, theatres, clubs, bars, conference facilities, entertainment venues,studios (professional/project), home tuition and practice. Description: Mic clip included Height adjustable Lightweight and strong Folds to a nice compact size ABS plastic body Steel chrome legs Rubber non-slip feet Quick and easy to assemble/disassemble The mic clip can be unscrewed clip diameter: about 3.5cm Package Includes : 1 x Microphone Stand
Easy fold-up
compact size
Lightweight and strong
Easy fold-up
compact size
Lightweight and strong
| Product Title | KLUZIE Mini Desktop Mic Tripod Stand Conference Room, Studio Sound Holder Stand(Black, Steel) |
|---|---|
| Product Brand | KLUZIE |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
Easypro 2 Pcs Microphone Foam Mic Shield Cover Black Mic Sponge(Black)
Product Details:
1.The Foam with features of high elasticity, durable and soft. 2.Good replacement for your worn-out or lost headset microphone pads. 3.Compatible with most headset microphone. Material:Foam
| Product Title | Easypro 2 Pcs Microphone Foam Mic Shield Cover Black Mic Sponge(Black) |
|---|---|
| Product Brand | Easypro |
| Product Price | ₹199/- |
| Product Type | Musical Instruments, Microphone Accessories |
Fedus 3.5 Mm Male-to Male Plug Stereo Audio Jack Extender Adapter Headphone Adapter(Silver)
Product Details:
"This great audio adapter can convert single 3.5mm male plug to single 3.5mm male plug. It can connect One 3.5mm female plug to Another. This audio adapter is silver molded metal construction. It is easy to use and convenient to carry. A Great audio adapter used with PC, stereo, MP3 players! Description: •Single 3.5mm male plug to single 3.5mm male plug •Silver molded metal construction •Can connect One 3.5mm female plug to Another without a loss of quality •Use with PC, stereo, MP3 players etc •Length : Approx. 52 mm/ 2.05 inch •Material: Copper+Zinc-alloy •Color: Sliver "
| Product Title | Fedus 3.5 Mm Male-to Male Plug Stereo Audio Jack Extender Adapter Headphone Adapter(Silver) |
|---|---|
| Product Brand | Fedus |
| Product Price | ₹499/- |
| Product Type | Musical Instruments, Microphone Accessories |
Samson TM-30 Tourtek Microphone Cables Microphone Cable(Black)
| Product Title | Samson TM-30 Tourtek Microphone Cables Microphone Cable(Black) |
|---|---|
| Product Brand | Samson |
| Product Price | ₹2419/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Male To 3.5MM Mono Male 10 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Male to 3.5MM Mono Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on CCTV, medical instruments, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Male Connector and 3.5MM Mono Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - 6.3MM Stereo MaleConnector B: - 3.5MM Mono MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo MaleConnector Side B: - 3.5MM Mono Male Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Male To 3.5MM Mono Male 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1140/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown BNC Male To BNC Male For CCTV/DVR 1.5Meter Cable(Black)
Product Details:
"Krown BNC Male to BNC Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on CCTV, medical instruments, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated BNC Male Connector and BNC Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - BNC MaleConnector B: - BNC MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - BNC Male Connector Side B: - BNC MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown BNC Male To BNC Male For CCTV/DVR 1.5Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹550/- |
| Product Type | Musical Instruments, Microphone Accessories |
Black Dragon Flag Logo Logo(White)
| Product Title | Black Dragon Flag Logo Logo(White) |
|---|---|
| Product Brand | Black Dragon |
| Product Price | ₹999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown RCA Female To BNC Male 10 Meter Cable(Black)
Product Details:
"Krown RCA Female to BNC Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated RCA Female Connector and BNC Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - RCA FemaleConnector B: - BNC MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - RCA FemaleConnector Side B: - BNC MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown RCA Female To BNC Male 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1120/- |
| Product Type | Musical Instruments, Microphone Accessories |
ShoppoStreet Handheld Wireless Microphone With Bluetooth Speaker Bluetooth Speaker(Pink)
Product Details:
Multipurpose: Bluetooth speaker, Karaoke singing, Car Stereo, instrument recording, interviews, podcasting, etc. Ideal for all vocal applications from singing to speech and usable as bluetooth speaker. Features: With the karaoke speaker you can instantly create your own Karaoke fun anywhere you like. For the budding singer there's no better way to show off to your friends and bring some X-factor magic to your life because if you've got talent then why not flaunt it. Get into the party mood and sing till you drop with the Q7 Bluetooth Microphone and Speaker. This is the latest in portable music entertainment as it will let you play music direct from your Smartphone or other Bluetooth enabled Device. Product Type: Full Metal K Song Microphone. Pickup: Capacitive Bluetooth 2.1.
| Product Title | ShoppoStreet Handheld Wireless Microphone With Bluetooth Speaker Bluetooth Speaker(Pink) |
|---|---|
| Product Brand | ShoppoStreet |
| Product Price | ₹1499/- |
| Product Type | Musical Instruments, Microphone Accessories |
Little Monkey Rechargeable (BLACK) Wireless Karaoke Inbuilt Speaker With Audio Recording And Bluetooth Microphone WIRELESS(Multicolor)
Product Details:
Top Selling Portable WS-858 Wireless Handheld Bluetooth ALL MOBILE SUPPORTED (ROSE GOLD)
PC
LAPTOP
TABLET
MOBILE
PC
LAPTOP
TABLET
MOBILE
| Product Title | Little Monkey Rechargeable (BLACK) Wireless Karaoke Inbuilt Speaker With Audio Recording And Bluetooth Microphone WIRELESS(Multicolor) |
|---|---|
| Product Brand | Little Monkey |
| Product Price | ₹1499/- |
| Product Type | Musical Instruments, Microphone Accessories |
Rode 3.5mm TRRS To TRS Adaptor For SmartLav 3.5mm TRRS To TRS Adaptor(Black / Grey)
| Product Title | Rode 3.5mm TRRS To TRS Adaptor For SmartLav 3.5mm TRRS To TRS Adaptor(Black / Grey) |
|---|---|
| Product Brand | Rode |
| Product Price | ₹980/- |
| Product Type | Musical Instruments, Microphone Accessories |
Boya BY B04 Fur Windscreen For PVM1000L, Rode Video Mic Pro(Black)
Product Details:
Product description BOYA BY B04 Fur Windscreen BOYA is a high-quality condenser microphones brand; it creates the true nature of sensory experience customers. This BY-B04 fur windscreen is specially designed for BOYA BY-PVM1000L. Specifications: Model: BY-B04. Greatly reduces wind noise. Rode Stereo VideoMic Pro. With elastic cord at the opening for free adjustment. Weight: Approx. 25g. 100% Brand new. Suitable for: For Boya BY-PVM1000L. Package Includes: 1 x Fur Windscreen 1 x Original Packing
| Product Title | Boya BY B04 Fur Windscreen For PVM1000L, Rode Video Mic Pro(Black) |
|---|---|
| Product Brand | Boya |
| Product Price | ₹1990/- |
| Product Type | Musical Instruments, Microphone Accessories |
BSP Q7 Handheld Wireless Bluetooth Karaoke Singing Mic Speaker Player Microphone (Gold) BSP Q7 Microphone(Gold)
| Product Title | BSP Q7 Handheld Wireless Bluetooth Karaoke Singing Mic Speaker Player Microphone (Gold) BSP Q7 Microphone(Gold) |
|---|---|
| Product Brand | BSP |
| Product Price | ₹1599/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX SPEAKER FLOOR STAND For PRO AUDIO SPEAKERS Stands(Black)
Product Details:
Lightweight Speaker stand for loads up to 50 kg. Ideal for speakers and monitors. Extension tube diameter 38 mm. Gradually height-adjustable. Non-scratching locking screw. Foldable and light weight for easy transport.
| Product Title | MX SPEAKER FLOOR STAND For PRO AUDIO SPEAKERS Stands(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹2800/- |
| Product Type | Musical Instruments, Microphone Accessories |
Samson TM-20 Tourtek Microphone Cable(Black)
Product Details:
Tourtek Cables have been designed for musicians and sound engineers who require superior sound quality and demand ultimate reliability. The cables exceed the design goal by combining quality components like genuine Neutrik® connectors and durable low-noise wire with solid build construction.
| Product Title | Samson TM-20 Tourtek Microphone Cable(Black) |
|---|---|
| Product Brand | Samson |
| Product Price | ₹1982/- |
| Product Type | Musical Instruments, Microphone Accessories |
Pop WS-858 Wireless Handheld Bluetooth Mic With Speaker (Bluetooth Speaker) Audio Recording And Karaoke Feature Microphone Handheld(Pink)
| Product Title | Pop WS-858 Wireless Handheld Bluetooth Mic With Speaker (Bluetooth Speaker) Audio Recording And Karaoke Feature Microphone Handheld(Pink) |
|---|---|
| Product Brand | Pop |
| Product Price | ₹2999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Sonic Plumber 3.5mm EP Stereo To 1/4 Inch TRS Jack (2m) Cable(Black)
Product Details:
Professional quality cable. Shielded with braiding for protection from RF. Oxygen free copper ensures long life and high fidelity audio.
Gold Plated 3.5mm
Nickel Plated 1/4 inch
Gold Plated 3.5mm
Nickel Plated 1/4 inch
| Product Title | Sonic Plumber 3.5mm EP Stereo To 1/4 Inch TRS Jack (2m) Cable(Black) |
|---|---|
| Product Brand | Sonic Plumber |
| Product Price | ₹750/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Mono Male To 6.3MM Stereo Female 5 Meter Cable(Black)
Product Details:
"Krown 6.3MM Mono Male to 6.3MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Mono Male Connector and 6.3MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Mono MaleConnector B: 6.3MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Mono MaleConnector Side B: - 6.3MM Stereo Female Signal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Mono Male To 6.3MM Stereo Female 5 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹720/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Female To 6.3MM Stereo Female 10 Meter Cable(Black)
Product Details:
"Krown XLR Female to 6.3MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Female Connector and 6.3MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: XLR FemaleConnector B: 6.3MM Stereo Female Unbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - XLR Female Connector Side B: - 6.3MM Stereo FemaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Female To 6.3MM Stereo Female 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1200/- |
| Product Type | Musical Instruments, Microphone Accessories |
ESP 5 PCs 3.5mm 3 Pole Male Repair Headphones Audio Jack Plug Connector Head, 3.5 Mm Audio Pin Electronic Component(Multicolor)
Product Details:
5 PCs 3.5mm 3 Pole Male Repair Headphones Audio Jack Plug Connector Head, 3.5 mm audio pin
| Product Title | ESP 5 PCs 3.5mm 3 Pole Male Repair Headphones Audio Jack Plug Connector Head, 3.5 Mm Audio Pin Electronic Component(Multicolor) |
|---|---|
| Product Brand | ESP |
| Product Price | ₹299/- |
| Product Type | Musical Instruments, Microphone Accessories |
Zeom Microphone Suspension Boom Scissor Arm Stand Microphone Stand (Black) Microhone Stand(Black)
Product Details:
The professional recording microphone stand you're looking at is a convenient and useful invention widely used in stores, families, stages, studios, broadcasting and TV stations, etc. Made of durable metal and plastic, our professional recording microphone stand delivers long-time performance and great craftsmanship. Moreover, the adjustable legs allow you to carry it with you easily and adjust the suitable angle & height to show your perfect voice. Fit for all kinds of microphones in the current market and designed for heavy duty carry, this microphone stand must be your best assistant in recording! Feature: Adjustable legs for placement on uneven surfaces Compact microphone stand designed for heavy duty carry Easy to suitable for all microphones A convenient and useful invention widely used in stores, families, stages, studios, broadcasting and TV stations and so on Completely flexible, firmly attach the microphone anywhere Folding type, convenient to carry
microphone holder
studio mic stand
microphone stand
microphone holder
studio mic stand
microphone stand
| Product Title | Zeom Microphone Suspension Boom Scissor Arm Stand Microphone Stand (Black) Microhone Stand(Black) |
|---|---|
| Product Brand | Zeom |
| Product Price | ₹799/- |
| Product Type | Musical Instruments, Microphone Accessories |
Kanha Hub Foldable Music Book Notation Foldable Music Book Notation Stand(Black)
Product Details:
Foldable Music Book Notation
Music Book Notation
Music Book Notation
| Product Title | Kanha Hub Foldable Music Book Notation Foldable Music Book Notation Stand(Black) |
|---|---|
| Product Brand | Kanha Hub |
| Product Price | ₹1999/- |
| Product Type | Musical Instruments, Microphone Accessories |
HUBSTAR HIGH Quality 3.5mm Clip Microphone | Collar Mike For Voice Recording | Mic Mobile, PC, Laptop, Android Smartphones, DSLR Camera CMA_001 COLLAR MIC(Black)
Product Details:
HIGH Quality 3.5mm Clip Microphone | Collar Mike for Voice Recording | Mic Mobile, PC, Laptop, Android Smartphones, DSLR Camera.
| Product Title | HUBSTAR HIGH Quality 3.5mm Clip Microphone | Collar Mike For Voice Recording | Mic Mobile, PC, Laptop, Android Smartphones, DSLR Camera CMA_001 COLLAR MIC(Black) |
|---|---|
| Product Brand | HUBSTAR |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
Boya BY-T50 Microphone Foam(Black)
| Product Title | Boya BY-T50 Microphone Foam(Black) |
|---|---|
| Product Brand | Boya |
| Product Price | ₹2490/- |
| Product Type | Musical Instruments, Microphone Accessories |
Little Monkey Portable WS-858 Wireless Handheld Bluetooth Connection Player Speaker 3-in1 Mic For IOS And Andriod System Mobile Phones Microphone Microphone With Recording (Gold) WIRELESS(Multicolor)
Product Details:
Top Selling Portable WS-858 Wireless Handheld Bluetooth ALL MOBILE SUPPORTED (ROSE GOLD)
PC
LAPTOP
TABLET
MOBILE
PC
LAPTOP
TABLET
MOBILE
| Product Title | Little Monkey Portable WS-858 Wireless Handheld Bluetooth Connection Player Speaker 3-in1 Mic For IOS And Andriod System Mobile Phones Microphone Microphone With Recording (Gold) WIRELESS(Multicolor) |
|---|---|
| Product Brand | Little Monkey |
| Product Price | ₹1699/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX 3465C Stand(Black)
Product Details:
MX stands and booms are designed to eliminate the problems associated with ordinary stands. MX stands offer a new approach to solving these problems, for a stand that's incredibly versatile and easy to use. Hybrid sheet-metal and a composite leg housing make it rugged and ready for the rough road life. Whether you need stand for your studio or your band's next tour, you can count on the Microphone stand.
| Product Title | MX 3465C Stand(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹2093/- |
| Product Type | Musical Instruments, Microphone Accessories |
ShoppoStreet Handheld Wireless Microphone With Bluetooth Speaker Bluetooth Speaker(Multicolor)
Product Details:
Multipurpose: Bluetooth speaker, Karaoke singing, Car Stereo, instrument recording, interviews, podcasting, etc. Ideal for all vocal applications from singing to speech and usable as bluetooth speaker. Features: With the karaoke speaker you can instantly create your own Karaoke fun anywhere you like. For the budding singer there's no better way to show off to your friends and bring some X-factor magic to your life because if you've got talent then why not flaunt it. Get into the party mood and sing till you drop with the Q7 Bluetooth Microphone and Speaker. This is the latest in portable music entertainment as it will let you play music direct from your Smartphone or other Bluetooth enabled Device. Product Type: Full Metal K Song Microphone. Pickup: Capacitive Bluetooth 2.1.
| Product Title | ShoppoStreet Handheld Wireless Microphone With Bluetooth Speaker Bluetooth Speaker(Multicolor) |
|---|---|
| Product Brand | ShoppoStreet |
| Product Price | ₹1499/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX XLR 3 PIN FEMALE HEAVY DUTY - BLACK Connector(Black)
Product Details:
MX XLR 3 Pin Mic Female XLR socket is a type of connector used for many professional audio applications. MX XLR connectors do not suffer from insertion loss and high frequency cutoff. MX XLR Connectors are simple to use, Reliable and provide cable protection.
| Product Title | MX XLR 3 PIN FEMALE HEAVY DUTY - BLACK Connector(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹528/- |
| Product Type | Musical Instruments, Microphone Accessories |
Sonic Plumber XLR Female To 1/4 Inch TRS Jack (20m) Cable(Black)
Product Details:
Professional quality cable. Shielded with braiding for protection from RF. Oxygen free copper ensures long life and high fidelity audio.
Nickel Plated
Oxygen Free Copper
Braided Shielding
Nickel Plated
Oxygen Free Copper
Braided Shielding
| Product Title | Sonic Plumber XLR Female To 1/4 Inch TRS Jack (20m) Cable(Black) |
|---|---|
| Product Brand | Sonic Plumber |
| Product Price | ₹2550/- |
| Product Type | Musical Instruments, Microphone Accessories |
Prodx Microphone Table Desk With Clamp-5280x Stand(Black)
| Product Title | Prodx Microphone Table Desk With Clamp-5280x Stand(Black) |
|---|---|
| Product Brand | Prodx |
| Product Price | ₹885/- |
| Product Type | Musical Instruments, Microphone Accessories |
Prodx Xlr To Xlr Female Microphone Extention Blue 3mtr Cable(Blue)
| Product Title | Prodx Xlr To Xlr Female Microphone Extention Blue 3mtr Cable(Blue) |
|---|---|
| Product Brand | Prodx |
| Product Price | ₹550/- |
| Product Type | Musical Instruments, Microphone Accessories |
5 Core AR-888 Wired Plastic Microphone(Black)
Product Details:
DYNAMIC UNIDIRECTIONAL MICROPHONE • Sensitivity: 2.5mV/Pa • Impedance: 600 Q • Freq. Response: 50-15,000 Hz • 3M O 4.5 Plastic XLR Connector • Copper Cable
| Product Title | 5 Core AR-888 Wired Plastic Microphone(Black) |
|---|---|
| Product Brand | 5 Core |
| Product Price | ₹499/- |
| Product Type | Musical Instruments, Microphone Accessories |
BIRATTY Professional Studio Recording Condenser Microphone Stand Microphone Stand(Black)
| Product Title | BIRATTY Professional Studio Recording Condenser Microphone Stand Microphone Stand(Black) |
|---|---|
| Product Brand | BIRATTY |
| Product Price | ₹1499/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX Professional Microphone Holder Mic Clip For Microphones Mic Holder(Black)
| Product Title | MX Professional Microphone Holder Mic Clip For Microphones Mic Holder(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹199/- |
| Product Type | Musical Instruments, Microphone Accessories |
Zeom Microphone Pop Filter Stand (Black) Microhone Stand(Black)
Product Details:
The professional recording microphone stand you're looking at is a convenient and useful invention widely used in stores, families, stages, studios, broadcasting and TV stations, etc. Made of durable metal and plastic, our professional recording microphone stand delivers long-time performance and great craftsmanship. Moreover, the adjustable legs allow you to carry it with you easily and adjust the suitable angle & height to show your perfect voice. Fit for all kinds of microphones in the current market and designed for heavy duty carry, this microphone stand must be your best assistant in recording! Feature: Adjustable legs for placement on uneven surfaces Compact microphone stand designed for heavy duty carry Easy to suitable for all microphones A convenient and useful invention widely used in stores, families, stages, studios, broadcasting and TV stations and so on Completely flexible, firmly attach the microphone anywhere Folding type, convenient to carry
microphone holder
studio mic stand
microphone stand
microphone holder
studio mic stand
microphone stand
| Product Title | Zeom Microphone Pop Filter Stand (Black) Microhone Stand(Black) |
|---|---|
| Product Brand | Zeom |
| Product Price | ₹799/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Male To 3.5MM Mono Male 1.5Meter Cable(Black)
Product Details:
"These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated XLR Male Connector and 3.5MM Mono Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 3 Pin XLR MaleConnector B: 3.5MM Mono Male Unbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 3 Pin XLR MaleConnector Side B: - 3.5MM Mono MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Male To 3.5MM Mono Male 1.5Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹600/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown XLR Male To 6.3MM Stereo Female Cable 10 Meter Cable(Black)
Product Details:
"Features:Length: 10 MeterConnector A: 3 Pin XLR MaleConnector B: 6.3MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A :- 3 Pin XLR MaleConnector Side B :- 6.3MM Stereo FemaleLength :- 10 MeterSignal Type :- Mono / UnbalancedUse :- AudioColor :- BlackShielding :- Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scroller miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a âÂÂthree-leggedâ type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems. "
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown XLR Male To 6.3MM Stereo Female Cable 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1200/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX 5 Pcs Of 6.35mm TS Mono Jack P-38 Connector For Guitars And Instruments Connector(Silver, Green)
Product Details:
MX P-38 MONO PLUG TERMINAL TYPE WITH SCREW to 2 pin screw terminal adapter / converter. MX P-38/TS Mono plug connector is used for many professional audio applications. The 2 pin screw terminal side makes it simple for the installer to insert and secure Microphone cable. MX P-38/TS Connectors are simple to use, Reliable and provide cable protection. MX P-38/TS connector does not suffer from insertion loss.
| Product Title | MX 5 Pcs Of 6.35mm TS Mono Jack P-38 Connector For Guitars And Instruments Connector(Silver, Green) |
|---|---|
| Product Brand | MX |
| Product Price | ₹180/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To 3.5MM Stereo Female 8 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to 3.5MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and 3.5MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - 6.3MM Stereo FemaleConnector B: - 3.5MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - 3.5MM Stereo FemaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To 3.5MM Stereo Female 8 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹860/- |
| Product Type | Musical Instruments, Microphone Accessories |
MX Microphone Holder With Better Grip Anti Shock For Microphones Mic Holder(Black)
| Product Title | MX Microphone Holder With Better Grip Anti Shock For Microphones Mic Holder(Black) |
|---|---|
| Product Brand | MX |
| Product Price | ₹435/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown BNC Male To BNC Male For CCTV/DVR 8 Meter Cable(Black)
Product Details:
"Krown BNC Male to BNC Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on CCTV, medical instruments, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated BNC Male Connector and BNC Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - BNC MaleConnector B: - BNC MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - BNC Male Connector Side B: - BNC MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown BNC Male To BNC Male For CCTV/DVR 8 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹840/- |
| Product Type | Musical Instruments, Microphone Accessories |
Powerpak Universal Microphone Shock Mount Holder Clip For Studio Condenser Microphone Plastic Shock Mount(Black)
Product Details:
This professional suspension shock mount an angle adjustment with locking knob. This is a very nice shock mount for most large diaphragm condenser microphones. The shock mount only fits microphone diameter ranging from 43mm-50mm Foam insert to hold and protect microphone Standard 5/8 -27 thread with a 3/8 -5/8 screw adapter,so you can mount it on all the standard microphone stands. Package Includes: 1x Shock Mount
| Product Title | Powerpak Universal Microphone Shock Mount Holder Clip For Studio Condenser Microphone Plastic Shock Mount(Black) |
|---|---|
| Product Brand | Powerpak |
| Product Price | ₹2000/- |
| Product Type | Musical Instruments, Microphone Accessories |
Robustrion Microphone Suspension Boom Scissor Arm Stand(Black)
| Product Title | Robustrion Microphone Suspension Boom Scissor Arm Stand(Black) |
|---|---|
| Product Brand | Robustrion |
| Product Price | ₹1999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown RCA Female To 3.5MM Mono Male 8 Meter Cable(Black)
Product Details:
"Krown RCA Female to 3.5MM Mono Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated RCA Female Connector and 3.5MM Mono Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - RCA FemaleConnector B: - 3.5MM Mono MaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - RCA FemaleConnector Side B: - 3.5MM Mono MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown RCA Female To 3.5MM Mono Male 8 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹860/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To 6.3MM Stereo Female 10 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to 6.3MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and 6.3MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6 6.3MM Stereo FemaleConnector B: 6.3MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - 6.3MM Stereo FemaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To 6.3MM Stereo Female 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1140/- |
| Product Type | Musical Instruments, Microphone Accessories |
DREamBell DB-Notation/Reading Stand Book Stand(Black)
| Product Title | DREamBell DB-Notation/Reading Stand Book Stand(Black) |
|---|---|
| Product Brand | DREamBell |
| Product Price | ₹999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Bespeco JJ 600 6MTR Cable(Multicolor)
Product Details:
Cable Type: mono 6 mm.Cable length: 6 meterConnectors Used: Jack mono - jack monoCables colors available: Black/orangePackaging: Blister
| Product Title | Bespeco JJ 600 6MTR Cable(Multicolor) |
|---|---|
| Product Brand | Bespeco |
| Product Price | ₹750/- |
| Product Type | Musical Instruments, Microphone Accessories |
Wright WR35 Microphone Stand(Black)
| Product Title | Wright WR35 Microphone Stand(Black) |
|---|---|
| Product Brand | Wright |
| Product Price | ₹699/- |
| Product Type | Musical Instruments, Microphone Accessories |
Adhbhud Microphone Tie Clip Collar Clip Holder Mic Clip(Black)
| Product Title | Adhbhud Microphone Tie Clip Collar Clip Holder Mic Clip(Black) |
|---|---|
| Product Brand | Adhbhud |
| Product Price | ₹399/- |
| Product Type | Musical Instruments, Microphone Accessories |
Easy Way Wireless Handheld Bluetooth Mic With Speaker Bluetooth Microphone Speaker(Multicolor)
Product Details:
Bluetooth Microphone with Mike Speaker Stereo Portable Singing Recording is very useful in schools for teachers, outdoor activities, examination hall, meetings, conferences, kirtans, temples or any other religious gathering places , picnics, kitty parties, cocktail parties. THIS IS DEVICE IS AMAZING FOR FOND OF SINGING PEOPLE Professional tuning button high pitch / bass/volume/accompany/reverberation all can be adjusted via this microphone Bluetooth wireless microphone and speaker 2 in 1 can work independently without extra connection 2600Mah battery for up to 8 hours of singing enjoy ktv karaoke effects with the smartphone app High compatibility fit for IOS and android smartphone iPad tablet can read USB card Bluetooth connection .
| Product Title | Easy Way Wireless Handheld Bluetooth Mic With Speaker Bluetooth Microphone Speaker(Multicolor) |
|---|---|
| Product Brand | Easy Way |
| Product Price | ₹2999/- |
| Product Type | Musical Instruments, Microphone Accessories |
Black Dragon 2 Logo Holder(White)
| Product Title | Black Dragon 2 Logo Holder(White) |
|---|---|
| Product Brand | Black Dragon |
| Product Price | ₹1998/- |
| Product Type | Musical Instruments, Microphone Accessories |
Shrih Guitar Plug Interface Adapter(Black)
Product Details:
Guitar Plug Interface Adapter iPad iPhone iPod.Features:Works on iPhone/iPod touch/iPad.Connect electric guitar and bass.Also works with line level signals from synthesizers, keyboards, mixers.Output can be connected to headphones, amplifiers, powered speakers, mixers.Description;Product Features With AmpliTube for iPhone, youll have an entire guitar/bass rig at your fingertips, comprised of 3 recombinable simultaneous stompbox effects, an amp-head plus cabinet and a microphone. You can capture your ideas quickly by recording your performances with the built-in recorder featuring re-amping capabilities, then share your track by exporting high quality audio files or MP3s. With AmpliTube for iPhone fully loaded, you will be able to choose between 5 amps (clean, crunch, lead, metal, bass) with full controls, 16 stompbox effects (delay, reverb, fuzz, distortion, overdrive, wah, envelope filter, chorus, flanger, phaser, octave, noise filter, compressor, limiter parametric EQ, six band graphic equalizer), 5 cabinets and 2 microphones (dynamic and condenser). Features : Works on iPhone/iPod touch/iPad. 1/4 female mono input jack connector. 1/8 female stereo output mini-jack connector. Connect electric guitar and bass. Also works with line level signals from synthesizers, keyboards, mixers. Output can be connected to headphones, amplifiers, powered speakers, mixers. Real time guitar and bass mobile multiFX recording app. Full rig with 3 simultaneous stompboxes amp with effects cabinet mic. 11 Stomps, 5 Amps, 5 Cabinets, 2 Mics expandable with 5 Stomps available through in-app purchase. Single track recorder, with re-amping, expandable to full 4 tracks recording studio with master effects section through in-app purchase. Import and play up to 50 songs to be used as backing tracks directly from your iPod library or computer. Slow down or speed up to tempo (-50% to 200%) of imported songs without affecting their pitch.
| Product Title | Shrih Guitar Plug Interface Adapter(Black) |
|---|---|
| Product Brand | Shrih |
| Product Price | ₹3200/- |
| Product Type | Musical Instruments, Microphone Accessories |
KLUZIE Professional Microphone Stand Universal Adjustable Mic Holder Tripod Stand BC-08 Mic Holder Stand(Black, Steel)
Product Details:
This microphone stand is designed for use on a table or desk, excellent for commentary, panel discussions, announcements and other similar situations. This stand can also be used for micing up speaker cabinets and instruments. Perfect for schools, theatres, clubs, bars, conference facilities, entertainment venues,studios (professional/project), home tuition and practice. Description: Mic clip included Height adjustable Lightweight and strong Folds to a nice compact size ABS plastic body Steel chrome legs Rubber non-slip feet Quick and easy to assemble/disassemble The mic clip can be unscrewed clip diameter: about 3.5cm Package Includes : 1 x Microphone Stand
Easy fold-up
compact size
Lightweight and strong
Easy fold-up
compact size
Lightweight and strong
| Product Title | KLUZIE Professional Microphone Stand Universal Adjustable Mic Holder Tripod Stand BC-08 Mic Holder Stand(Black, Steel) |
|---|---|
| Product Brand | KLUZIE |
| Product Price | ₹700/- |
| Product Type | Musical Instruments, Microphone Accessories |
Black Dragon 3.5 Mm To Xlr 5 Mtrs XLR Female(Black)
Product Details:
This cable is designed to connect an XLR microphone to the 3.5mm mini input of a digital camcorder, DSLR camera, or computer sound card.(Note: Microphone must be separately powered) This cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed. Oxygen-Free Copper (OFC) conductors for enhanced signal clarity, OFC spiral shield for effective EMI and RFI rejection and flexibility Connector(s): 1/4 inch TRS to XLR Female. Length: 5 Meters
| Product Title | Black Dragon 3.5 Mm To Xlr 5 Mtrs XLR Female(Black) |
|---|---|
| Product Brand | Black Dragon |
| Product Price | ₹1290/- |
| Product Type | Musical Instruments, Microphone Accessories |
Neewer Universal Microphone Shock Mount Holder Clip Anti Vibration Suspension High Isolation, Bearable Load 3KG / 106oz Holder(Black)
Product Details:
Anti Vibration Suspension High Isolation, Bearable Load 3KG / 106oz
| Product Title | Neewer Universal Microphone Shock Mount Holder Clip Anti Vibration Suspension High Isolation, Bearable Load 3KG / 106oz Holder(Black) |
|---|---|
| Product Brand | Neewer |
| Product Price | ₹2499/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Stereo Female To 3.5MM Stereo Female 10 Meter Cable(Black)
Product Details:
"Krown 6.3MM Stereo Female to 3.5MM Stereo Female Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Stereo Female Connector and 3.5MM Stereo Female Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: - 6.3MM Stereo FemaleConnector B: - 3.5MM Stereo FemaleUnbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Stereo Female Connector Side B: - 3.5MM Stereo FemaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Stereo Female To 3.5MM Stereo Female 10 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹1140/- |
| Product Type | Musical Instruments, Microphone Accessories |
Zeom Microphone Suspension Boom Scissor Arm Stand (Black) Microhone Stand(Black)
Product Details:
The professional recording microphone stand you're looking at is a convenient and useful invention widely used in stores, families, stages, studios, broadcasting and TV stations, etc. Made of durable metal and plastic, our professional recording microphone stand delivers long-time performance and great craftsmanship. Moreover, the adjustable legs allow you to carry it with you easily and adjust the suitable angle & height to show your perfect voice. Fit for all kinds of microphones in the current market and designed for heavy duty carry, this microphone stand must be your best assistant in recording! Feature: Adjustable legs for placement on uneven surfaces Compact microphone stand designed for heavy duty carry Easy to suitable for all microphones A convenient and useful invention widely used in stores, families, stages, studios, broadcasting and TV stations and so on Completely flexible, firmly attach the microphone anywhere Folding type, convenient to carry
microphone holder
studio mic stand
microphone stand
microphone holder
studio mic stand
microphone stand
| Product Title | Zeom Microphone Suspension Boom Scissor Arm Stand (Black) Microhone Stand(Black) |
|---|---|
| Product Brand | Zeom |
| Product Price | ₹799/- |
| Product Type | Musical Instruments, Microphone Accessories |
Techtest Professional Microphone BM-800 With Mic Stand And Pop Filter Heavy Duty Suspension Scissor Arm And , Recordings, Broadcasting, Singing Upgraded Adjustable With Shock Mount Clip Holder Microphones Condenser Sound YouTube, Gaming Recording Studio Broadcasting ( Metal Stand NB-35 + Microphone
Product Details:
The microphone set includes Condenser Microphone BM-800, Pop Filter Wind Screen and Scissor Arm Stand. This microphone with a good cardioids polar pickup pattern, high output, low self-noise, suitable especially for studios, recording studios, broadcasting stations, adage performances and computer.Ideal as main and support microphone for studio and live applications Application: 1.Turn on your amplifier or mixing board and set the volume control to minimum position. Connect the phantom power to the microphone, turn on the phantom switch ,accommodate the volume control from low to high to obtain effect to your moderate level to protect the sauna from pounding. 2.If the head of the microphone is covered by hand or brought close to the speaker ,a howling sound may be generated to prevent this, first decrease the volume, then place the microphone so that it is not pointed to the speaker and that this is a sufficient distance between the microphone and speaker. 3.The sensitivity of cartridge is very fine ,do not drop, hit or apply strong shock to it. 4.Maintain the sensitivity and quality of sound reproduction, avoid exposing it to moisture and extreme temperatures
Condenser Microphone
Condenser Microphone
| Product Title | Techtest Professional Microphone BM-800 With Mic Stand And Pop Filter Heavy Duty Suspension Scissor Arm And , Recordings, Broadcasting, Singing Upgraded Adjustable With Shock Mount Clip Holder Microphones Condenser Sound YouTube, Gaming Recording Studio Broadcasting ( Metal Stand NB-35 + Microphone |
|---|---|
| Product Brand | Techtest |
| Product Price | ₹5000/- |
| Product Type | Musical Instruments, Microphone Accessories |
Krown 6.3MM Mono Male To 6.3MM Stereo Male 5 Meter Cable(Black)
Product Details:
"Krown 6.3MM Mono Male to 6.3MM Stereo Male Cables are typically used for analog signals, primarily audio. These cables are commonly used on headphones, microphones, amplifiers, instruments, speakers, and much more. This cables feature an unbalanced nickel plated 6.3MM Mono Male Connector and 6.3MM Stereo Male Connector. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Krown cables are perfect for novice and professional musicians.Features:Connector A: 6.3MM Mono MaleConnector B: 6.3MM Stereo Male Unbalanced22AWG Twisted Pair constructionFoil shield and 60% copper braidNickel plated brass connectorsSpring strain relief7mm PVC jacketConnects unbalanced line outputs to unbalanced line inputsSpecifications:-Connector Side A: - 6.3MM Mono MaleConnector Side B: - 6.3MM Stereo MaleSignal Type: - Mono / UnbalancedUse: - AudioColor: - BlackShielding: - Fully shieldedFAQQ: What are XLR Cables commonly used for?A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.Q: What makes an XLR audio cable and DMX cable different?A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scrolled miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.Q: What is a balanced cable and what makes them different then an unbalanced cable?A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems."
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
Soldered Cable
Sheilded Wire
Pure Copper
Replaceable Connectors
| Product Title | Krown 6.3MM Mono Male To 6.3MM Stereo Male 5 Meter Cable(Black) |
|---|---|
| Product Brand | Krown |
| Product Price | ₹720/- |
| Product Type | Musical Instruments, Microphone Accessories |
Zoom WSU-1 Universal Windscreen For Handy Recorders & IOS Microphones Windscreen(Grey)
| Product Title | Zoom WSU-1 Universal Windscreen For Handy Recorders & IOS Microphones Windscreen(Grey) |
|---|---|
| Product Brand | Zoom |
| Product Price | ₹3000/- |
| Product Type | Musical Instruments, Microphone Accessories |
Boya By-P10 PROFESSIONAL FLUFFY WINDSHIELD(White)
Product Details:
Boya by-p10 ,Professional fluffy windshield for portable recorders. Inside size : 50 x 20 x 37mm Suitable for : Zoom IQ-6 Tascam DR-07 MKII Sony PCM-M10 Rode iXY,Vidpro XM88 AKG CK 98, 460, SE300 B + Capsule AudioTechnica AT8035 Azden SGM2X (Cardioid) Shure VP89
| Product Title | Boya By-P10 PROFESSIONAL FLUFFY WINDSHIELD(White) |
|---|---|
| Product Brand | Boya |
| Product Price | ₹2490/- |
| Product Type | Musical Instruments, Microphone Accessories |
